Backing options for fabricators

Ultrafab offers a wide variety of CUSTOM BACKING options to assist fabricators with specific problems relating to offline insertion and the elimination of Weatherstrip T channel slippage!

Ultra-Loc™

 

fabricator options

 

  • Solid polypropylene backing inserts more easily, saving time and reducing waste
  • ULTRA LOC® backing has a continuous series of tabs on each side of the backing which align and hold the backing in place
  • ULTRA LOC® is available in two versions, S7 which has a .015” tab or S9 which has a .025” tab for added holding power
  • No possibility of off-center pile that binds, breaks or stretches in an extrusion
  • ULTRA LOC® is designed to be inserted by hand or by an automated process using ULTRAFAB’s patented pile insertion equipment

 

ULTRA LOC® is designed to be inserted by hand or by using ULTRAFAB’s patented pile insertion machine

Size Options:

  • Size 10 Ultra Loc™ - most aggressive for wide and varying T-slots (Available in .270”w & .187”w)
  • Size 9 Ultra Loc™ - (Available in .270”w, .229”w, .210”w, .200”w .187”w & .180”w)
  • Size 7 Ultra Loc™- for slight variation in T-slots dimensions (Available in .270”w, .210”w, .200”w, .187”w & .180”w) double
  • Solid polypropylene backing inserts more easily, saving time and reducing waste